Stainless steel modular drain channels light load
Outlet in one direction, sloped drainage side, with siphon bucket
Corner exit, inclined towards the outlet, with siphon and collection tray
Outlet in the middle, sloping towards the outlet, with a siphon and a collection tray
Sloping in one direction, without siphon
Three-sided drainage channel, outlet in the middle, sloping towards the outlet, with a siphon and a collection tray
With multiple outlets, each drain has two or more flow directions
Stainless steel modular drain channel industrial light load.
STANDARD CHARACTERISTICS OF STAINLESS STEEL CHANNELS TYPE:
The continuous waste water drainage systems can be connected to each other by means of flanges fitted with Teflon gaskets. With this, the watertight drainage system can be made to the desired length.
Type 1: grid channel with channel width 135 mm, grid width 99 mm
Type 2: grid channel with channel width 150 mm, grid width 114 mm
Type 3: grid channel with channel width 175 mm, grid width 139 mm
Type 4: grid channel with channel width 200 mm, grid width 164 mm
Type 5: grid channel with channel width 230 mm, grid width 264 mm
Type 6: grid channel with channel width 300 mm, grid width 294 mm
With a grid channel with a minimum depth of 40 mm and a maximum depth of 200 mm, it is possible to build a continuous – continuous waste water drainage system with a maximum length of 18000 mm, with a constant slope of 0.6% towards the outlet.
The continuous waste water drainage systems can be made to desired dimensions, provided that they meet slope, minimum and maximum depth.
STANDARD FEATURES
- By reducing the slope of the drain, it is possible to construct a waste water system up to a maximum length of 70.00 meters.
- By using multiple spouts, it is possible to construct a drainage system of several meters.
- The drainage gutter is provided on both sides with adjustable feet and anchorage strips with a mutual distance of 500 mm. This allows the drainage gutter to be attached to a concrete surface and adjusted in height.
- The drainage gutter with a plate thickness of 2.00 mm is provided with a flange of 5.00 mm. This is provided with a gasket and is attached with bolt and nut. The bolt and nut are made of 18/8 Cr / NI (AISI 304 quality).
OPTIONS
- On request this grid channel system can be made of stainless steel AISI 316 quality.
- To simplify assembly and to increase the load-bearing capacity of the upper profile, a stainless steel filling profile can be used
I want more information and advice?
Phone number : +90 (0) 549 276 59 54
E-mail :info@fenicromdrain.com
Stainless steel modular drain channels heavy load
Outlet in one direction, sloped drainage side,
with siphon bucket
Exit from the corner, sloping towards the outlet,
with a siphon and a collection tray
Outlet in the middle, sloping towards the outlet,
with a siphon and a collection tray
Sloping in one direction, without a siphon.
Three-sided drainage channel, outlet in the middle, sloping towards the outlet, with a siphon and a collection tray
With multiple outlets, each drain has two or more flow directions
Stainless steel modular drain channel industrial heavy load.
STANDARD CHARACTERISTICS OF STAINLESS STEEL CHANNELS
– The continuous waste water drainage systems can be connected to each other by means of flanges fitted with gaskets. With this, the watertight drainage system can be made to the desired length.
Type 1: grid channel with channel width 135 mm, grid width 99 mm
Type 2: grid channel with channel width 150 mm, grid width 114 mm
Type 3: grid channel with channel width 175 mm, grid width 139 mm
Type 4: grid channel with channel width 200 mm, grid width 164 mm
Type 5: grid channel with channel width 250 mm, grid width 214 mm
With a grid channel with a minimum depth of 55 mm and a maximum depth of 200 mm, it is possible to build a continuous – continuous waste water drainage system with a maximum length of 18000 mm, with a constant slope of 0.6% towards the outlet.
The continuous waste water drainage systems can be made to desired dimensions, provided that they meet slope, minimum and maximum depth.
STANDARD FEATURES
- By reducing the slope of the drain, it is possible to construct a waste water system up to a maximum length of 70.00 meters.
- By using multiple spouts, it is possible to construct a drainage system of several meters.
- The drainage gutter is provided on both sides with adjustable feet and anchorage strips with a mutual distance of 500 mm. This allows the drainage gutter to be attached to a concrete surface and adjusted in height.
- The drainage gutter with a plate thickness of 2.00 mm is provided with a flange of 5.00 mm. This is provided with a gasket and is attached with bolt and nut. The bolt and nut are made of 18/8 Cr / NI (AISI 304 quality).
OPTIONS
- On request this grid channel system can be made of stainless steel AISI 316 quality.
- To simplify assembly and to increase the load-bearing capacity of the upper profile, a stainless steel filling profile can be used
I want more information and advice?
Phone number : +90 (0) 549 276 59 54
E-mail :info@fenicromdrain.com
Stainless steel modular drain channels isolated light load
Suitable for chemical resistant flooring and concrete floors
Outlet in one direction, sloped drainage side,
with siphon bucket
Corner exit, inclined towards the outlet,
with siphon and collection tray
Outlet in the middle, sloping towards the outlet,
with a siphon and a collection tray
Three-sided drainage channel, outlet in the middle, sloping towards the outlet, with a siphon and a collection tray
Sloping in one direction, without siphon
With multiple outlets, each drain has two or more flow directions
AREAS OF APPLICATION
Facilities for production and processing of:
- Meat processing and meat products
- Dairy products
- Fish and seafood
- Poultry and eggs
- Frozen products
- Water, fruit juices and alcoholic drinks
- Bread and flour products
- Preserves
- Chocolate and candy
- Medicines
- Food Industry
- Chemical products
Stainless steel modular drain channel industrial isolated light load.
STANDARD CHARACTERISTICS OF STAINLESS STEEL CHANNELS
– The continuous waste water drainage systems can be connected to each other by means of flanges fitted with gaskets. With this, the watertight drainage system can be made to the desired length.
Type 1: grid channel with channel width 135 mm, grid width 126 mm
Type 2: grid channel with channel width 150 mm, grid width 141mm
Type 3: grid channel with channel width 175 mm, grid width 166 mm
Type 4: grid channel with channel width 200 mm, grid width 191 mm
Type 5: grid channel with channel width 230 mm, grid width 221 mm
With a grid channel with a minimum depth of 55 mm and a maximum depth of 150 mm, it is possible to build a continuous waste water drainage system with a maximum length of 18000 mm, with a constant slope of 0.6% towards the outlet.
The continuous waste water drainage systems can be made to desired dimensions, provided that they meet slope, minimum and maximum depth.
STANDARD FEATURES
- By reducing the slope of the drain, it is possible to construct a waste water system up to a maximum length of 70.00 meters.
- All channel elements must be of the same depth.
- By using multiple spouts, it is possible to construct a drainage system of several meters.
- The drainage gutter is provided on both sides with an anchorage with a mutual distance of 500 mm. This allows the drainage gutter to be attached to a concrete surface.
- Height adjustable supports are welded to the drain channel as standard to adjust the height and depth
- The drainage gutter with a plate thickness of 2.00 mm is provided with a flange of 5.00 mm. This is provided with a gasket and is attached with bolt and nut. The bolt and nut are made of 18/8 Cr / NI (AISI 304 quality).
OPTIONS
- On request this grid channel system can be made of stainless steel AISI 316 quality.
- To simplify assembly and to increase the load-bearing capacity of the upper profile, a PVC or stainless steel filling profile can be used
Projects
I want more information and advice?
Phone number : +90 (0) 549 276 59 54
E-mail :info@fenicromdrain.com
Stainless steel modular drain channels isolated heavy load
Suitable for chemical resistant flooring and concrete floors
Outlet in one direction, sloped drainage side,
with siphon bucket
Exit from the corner, sloping towards the outlet,
with a siphon and a collection tray
Outlet in the middle, sloping towards the outlet,
with a siphon and a collection tray
Three-sided drainage channel, outlet in the middle, sloping towards the outlet, with a siphon and a collection tray
With multiple outlets, each drain has two or more flow directions
Sloping in one direction, without a siphon
AREAS OF APPLICATION
Facilities for production and processing of:
- Meat processing and meat products
- Dairy products
- Fish and seafood
- Poultry and eggs
- Frozen products
- Water, fruit juices and alcoholic drinks
- Bread and flour products
- Preserves
- Chocolate and candy
- Medicines
- Food Industry
- Chemical products
Stainless steel modular drain channel industrial isolated heavy load.
STANDARD CHARACTERISTICS
The continuous waste water drainage systems can be connected to each other by means of flanges fitted with Teflon gaskets. With this, the watertight drainage system can be made to the desired length.
Type 1: grid channel with channel width 135 mm, grid width 123 mm
Type 2: grid channel with channel width 150 mm, grid width 138 mm
Type 3: grid channel with channel width 175 mm, grid width 163 mm
Type 4: grid channel with channel width 200 mm, grid width 188 mm
Type 5: grid channel with channel width 250 mm, grid width 238 mm
With a grid channel with a minimum depth of 55 mm and a maximum depth of 200 mm, it is possible to build a continuous – continuous waste water drainage system with a maximum length of 18000 mm, with a constant slope of 0.6% towards the outlet.
The continuous waste water drainage systems can be made to desired dimensions, provided that they meet slope, minimum and maximum depth.
STANDARD FEATURES
- By reducing the slope of the drain, it is possible to construct a waste water system up to a maximum length of 70.00 meters.
- By using multiple spouts, it is possible to construct a drainage system of several meters.
- The drainage gutter is provided on both sides with adjustable feet and anchorage strips with a mutual distance of 500 mm. This allows the drainage gutter to be attached to a concrete surface and adjusted in height.
- The drainage gutter with a plate thickness of 2.00 mm is provided with a flange of 5.00 mm. This is provided with a Teflon gasket and is attached with bolt and nut. The bolt and nut are made of 18/8 Cr / NI (AISI 304 quality).
OPTIONS
- On request this grid channel system can be made of stainless steel AISI 316 quality.
- To simplify assembly and to increase the load-bearing capacity of the upper profile, a stainless steel filling profile can be used
I want more information and advice?
Phone number : +90 (0) 549 276 59 54
E-mail :info@fenicromdrain.com
